Indoor Air Quality

Aprilaire

Aprilaire 800.

Aprilaire Model 800 steam humidifiers use electrode technology and are simple to install, operate, and maintain.  With electrode technology, electrical current flows between submerged electrodes, resistance of the water to the electric current heats the water.  The submerged electrodes are found in a replaceable canister.  At the end of a humidifier season, the canister – including the electrodes, is replaced.  No cleaning, no scrubbing, simply replace the canister and you’re ready for the next humidifier season. Electrode technology requires impurities in the water to promote the transfer of electricity.  For this reason, water filtration is not required with electrode technology, minimizing the complexity of the installation and ongoing operating costs.

Aprilaire 800 Whole House Steam Humidifier

Aprilaire 700 Whole House Fan Powered Humidifier

aprilaire-700-humidifier-hero-photo copy(1)

The Aprilaire Model 700 Humidifier is a whole-home solution that helps you achieve total comfort through humidity control.
Our evaporative humidifiers work by piping water into the distribution tray located at the top of the humidifier.  The water is uniformly distributed across the width of the tray and through a scientifically designed system of outlets. It flows by gravity over the water panel evaporator. Dry, hot air from the HVAC system is moved through the moisture-laden water panel evaporator. Natural evaporation takes place, the water is turned to vapor, and the humidified air is circulated throughout your home.

Purifi Labs

PuriFi Generator

Purifi Generator.

When particulate levels are too high the PuriFi PM Sensor activates the patented PuriFi Generator. The Generator, which is installed in your central HVAC system, uses our patented process to begin sending an overabundance of natural oxygen ions through all of your air ducts. Our patented blend of high energy, oxygen ions flood every room and begin the purification process. Every register in your home or business becomes an air and surface purification system.

  • Natural ion generating air purification
  • Oxidizes tested viruses, bacteria, and household germs*
  • Reduces airborne particulates such as PM1, PM2.5, and PM10*
  • Patented PuriFi O2 Catalyst reduces unwanted ozone*
  • Reduced particulate levels are proven with in-room PuriFi laser particle counters
  • 5-Year Limited Warranty

PuriFi PM SENSOR

PuriFi PM SENSOR

PM Sensor detects changes in indoor air quality, activating a response in real-time. The PuriFi Air Quality Sensor provides real-time feedback to the PuriFi Smart Hub, signaling the patented PuriFi Generator to respond to air quality changes. This laser particle counter has the ability to measure particles down to 0.3 micron in size or 1/118,100″ in diameter. When the PM Sensor detects that particle levels are too high, based on user-determined thresholds, the Generator is notified, and the system operates until the Sensor verifies that your air is clean and healthy again.

  • Proprietary Patented Technology
  • Continuously monitors indoor air and responds to changes real-time
  • Measures particulates down to 0.3 micron in size or 1/118,100″ in diameter
  • 3-Year Limited Warranty

PuriFi Smart Hub

Purifi smart hub.

The Smart Hub immediately signals a response to changes in indoor air quality. When a change in your indoor air quality is detected, the PuriFi Air Quality Sensor notifies the PuriFi Smart Hub, and the patented PuriFi Generator is signaled to respond-all in real-time. The system then operates to destroy the pollutants until the Sensor verifies that your air is clean again. The Smart Hub then signals the Generator to enter standby mode. The Smart Hub is compatible with popular digital assistants including Amazon Alexa and Google Assistant, as well as standard smart home protocols including Zigbee, Z-Wave, Lutron®, LAN and cloud-connected home automation devices.

Global Plamsa Solutions

GPS-FC24™-AC Auto-Cleaning Ionization System

GPS-FC24™-AC Auto-Cleaning Ionization System.

PRODUCT DESCRIPTION The GPS-FC24-AC is a self-cleaning, no maintenance, needlepoint bipolar ionization system designed to handle up to 2,400 CFM. The unit is designed for multiple mounting options including fan inlet, interior duct wall or interior duct floor.

STANDARD FEATURES Multi-voltage input, in-line On/Off switch, programmable self-cleaning cycle, operation status LED, integral Building Automation System (BAS) alarm contacts, magnets for ease of installation and carbon fiber brush emitters.*

*Life cycle testing shows no mechanical degradation of the carbon fiber brushes due to repeated cleaning cycles

GPS-FC48™-AC Auto-Cleaning Ionization System

GPS-FC48™-AC Auto-Cleaning Ionization System.

PRODUCT DESCRIPTION The GPS-FC48-AC is a self-cleaning, needlepoint bipolar ionization system designed to handle up to 4,800 CFM. The unit is designed for multiple mounting options including fan inlet, interior duct wall or interior duct floor.

STANDARD FEATURES Multi-voltage input, in-line On/Off switch, programmable self-cleaning cycle, operation status LED, integral Building Automation System (BAS) alarm contacts, magnets for ease of installation and carbon fiber brush emitters.*

*Life cycle testing shows no mechanical degradation of the carbon fiber brushes due to repeated cleaning cycles

Premier One

Premier One Media Cleaner

Premier P6100 Air Filter

  • Better filtration without increasing static pressure. MERV 16 performance at MERV 8 static (multiple pass systems).
  • Superior filtration traps germs, bacteria, viruses and allergens better than MERV 11 media filters. Effectiveness does not diminish over time like electronic precipitators. Removes particles down to .01 microns.
  • Affordable. Reasonably priced with minimal installation/labor cost.
  • Electrical consumption as little as $1 annually. 24 volts, less than 2 watts.
  • Filter media lifespan is 2-4 months. Media pads sold in handy 3-packs.
  • Easy installation. Fits into existing slot of standard throwaway furnace filters.

Need HVAC Service?

Contact the experts at Southwest Heating & Cooling.

Call us at (303) 791-2679!