When your HVAC system is not performing as expected, several different problems could be to blame. One option for returning the heating and cooling system to normal performance is to learn how to reset a thermostat. Consider seeking help from professionals offering HVAC services in Applewood, CO, to fix this issue.
You might also be able to perform a DIY thermostat settings reset. Learn more about the steps to take.
Resetting a Smart Thermostat
The only way to reset a smart thermostat is by interrupting the power cycle. With most designs, you will not be able to reset the device from the app on the smartphone.
Check the HVAC system to ensure it’s not running. Look through the menus on the display screen for a settings button. Within the settings menu, you might see a reset or reboot button. If so, press it to reset the thermostat.
The system might show a confirmation screen. Verify that you want to reset the unit. Once you confirm this choice, the system should reboot itself. This process can take several minutes.
If you’re considering buying a smart thermostat, the local power company serving Applewood, CO, sometimes offers rebates. Having a smart device to manage the temperatures of your heating and cooling system can help you save energy throughout all four seasons. Temperature in the Applewood, CO, area can range from the upper 80s in the summer to the teens in the winter.
Resetting a Programmable Thermostat
If you have a programmable thermostat, it might run on a battery instead of a hard-wired connection to a circuit breaker. Removing and replacing the batteries can reset this type of thermostat.
Start by switching the thermostat to the off position. Make sure the HVAC system is not running and then open the battery compartment on the unit. Often, the compartment is located on the back of the unit, which means you may need to remove the unit from the wall to access it.
Remove the old batteries and insert the fresh ones. Remount the unit to the wall and wait for it to restart with the new batteries.
Resetting a Low-Voltage Thermostat
Learning how to reset a thermostat with a low-voltage design can be tricky for homeowners. These thermostats are directly connected to the home’s wiring. You will likely need to remove the front cover, but avoid making contact with the wiring at the back of the unit during this process.
Set the system to the lowest temperature and brush any dust inside the unit. Change the system to the highest temperature and brush the dust again. Then replace the cover and reset the device to your desired temperature.
Resetting a Nest Thermostat
Many homes use the Nest brand of digital thermostat, and the manufacturer makes it easy to reset them. Press and hold the outer ring of the Nest device for at least 10 seconds, which should shut off the screen. Once the screen goes blank, release the ring.
After a few seconds, depress the ring again and let go immediately. After several seconds, the Nest logo should appear in the center of the screen, and the thermostat should go through its resetting process. If this doesn’t work, you might need to hold the ring down a little longer.
Resetting the Circuit Breaker
If none of the steps that we’ve listed for how to reset a thermostat give you the desired results, you can try to reset the circuit breaker. Most of the time, the HVAC system and thermostat are on the same circuit breaker, or your electrical panel may have a circuit breaker that separately serves the thermostat.
Flip the circuit breaker to the off position for about 30 seconds. Then flip it back to the on position. It can take several minutes for the thermostat to reset itself with this method.
Trust Southwest Heating & Cooling When You Need To Replace or Reset a Thermostat in Applewood, CO
If you don’t feel comfortable with the steps for how to reset a thermostat yourself, contact Southwest Heating & Cooling. Our technicians can perform a factory reset or check the circuit breaker. If the problem doesn’t relate to the thermostat, we can do repairs or a replacement for you.
Regardless of the HVAC problem you’re having, contact us today to request an appointment. We also provide summer HVAC tips for homeowners and perform maintenance services for furnaces. We serve the entire Applewood, CO, area, including homes and businesses near Maple Grove Reservoir, Graham Park or Interstate 70.